Action tables are primarily made from exotic African hardwoods. All of our timbers are harvested under the strictest conservation guidelines from established hardwood plantations or designated forests. We do not cut virgin forests or harvest in any endangered habitat areas.

The rails are machined to precise specifications and our sights are installed in the rails prior to the finish being applied which results in perfectly smooth sight, unlike many of our competitors where you can feel the sights protruding or recessed.

Master Speed BCA approved K-66 profile cushion rubbers are used on all Action tables. This superior quality cushion rubber results in one of the liveliest and most accurate rails in the industry. The cushion rubbers have a thin layer of cotton canvas on the top and the back of the surface which results in greater accuracy and control.

We are confident that we have the best cushion rubbers in the industry that we include them in our lifetime warranty, unlike many other manufacturers.

The accuracy of the rebound is also determined by the nose height and angle of placement of the cushion rubber. The modern machinery in the factory precisely controls the placement of the cushion rubbers to the rail resulting in a uniform nose height and consistent angle.

All Action tables have high performing T-nut which are used to attach the cushion rails to the slate. It is imperative to get a seamless transition between the rail and the slate as this provides the necessary strength and rigidity for proper playability. The T-nut allows the installer to get a greater torque resulting in a rail that sits perfectly flush to the slate.

To prevent the rail bolts from loosening over time all Action tables have dome washers which grips directly in to the slate.

All bolts go directly into threaded metal inserts. The cabinet is joined together with sturdy metal brackets. This “bolt together” construction allows for disassembly of the cabinet and reassembly with no loss of structural integrity.

Compare the Action table brackets used in the internal construction of our tables with other manufacturers and you will be amazed at the durability, strength and weight of the brackets we use.

On the underside of all Action table rails, is a recessed area where the cloth and the staples nestle which prevents either of these interfering with the attachment of the slate. Should the cloth or staples protrude the seamless transition between the slate and the rail would be compromised.

All Action table are hand stained and finished to enhance the beauty of the woods that are used. Between each application of stain the tables are hand sanded using ultra fine grit sanding pads. The final stage is a minimum of three applications of the catalyzed lacquer which results in a beautiful durable finish.

Action tables use only stains and lacquers that meet or exceed all international environmental standards.

All Action tables come with 1” slate. The slate is diamond honed to perfection to within ten-thousands of an inch and will provide a lifetime of playability. All of our slate has an attached framing that the cloth is stapled directly to. This framing allows for quieter play and professional cloth installation.

Hand tooled leather pockets in a variety of finishes compliment all of our traditional style tables. Top quality leather utilizing the old-fashioned pains-taking tanning and curing processes will provide years of reliable service. A choice of fringe or shield pockets in coordinating or contrasting finishes are available to compliment your table.

The modern style tables use an internal pocket which is available in either plastic or hard rubber.


To the home page